Blog

Are 45 rpm LPs better?

Are 45 rpm LPs better?

Since 45s travel faster than 33s, more waveform definition can be squeezed into the format, which takes up more room. More bumps and grooves created in pressing a 45 means better audio quality. Now, at 45 RPM’s the same audio will take up a foot and a half since its traveling faster.

What speed is a normal vinyl record?

33 1/3 Rotations Per Minute
Vinyl is pressed in one of 3 speeds: 33 1/3 Rotations Per Minute (RPM), 45 RPM, and 78 RPMs. The majority of 12-inch long play (LPs) are 33 1/3 RPMs, and most 7-inch extended play (EPs) or singles are 45 RPMs. However, 10-inch discs are common at both speeds and there are exceptions (e.g. 12-inch 45 RPM discs).

Are albums 45 RPM?

If you are a new comer to vinyl you may wonder what these numbers actually mean. Vinyl records typically come in three speeds: 33, 45 and 78 rotations per minute (RPM). If you’re like most record lovers you’ve probably flipped speeds from time to time in order to hear your music faster or slower than normal.

READ ALSO:   Does Google have QA engineer?

Is 45 rpm fast?

The 33 1/3 rpm and 45 rpm speeds continue to be the standards to this very day; 78 rpm records were largely phased out by the mid-1950s. Since 7-inch and 10-inch records hold less information, they are usually used as “singles” (i.e., they contain one song per side) playing at 45 rpm.

What is a 45 vinyl record?

Answer: The 7-inch, 45 RPM record was introduced by RCA Victor in 1949. Playing at a speed of 45 revolutions per minute, this type of record is often referred to as a “single” or, simply, a “45.” 45 RPM records became very popular in the 1950s and 1960s.

Why are some vinyl 45?

The 7 Inch (or “45”) is the most common form of vinyl single. At their peak in the 1950s and 60s, the 7 inch helped fuel the early years of rock and roll culture thanks to their relative affordability compared with expensive 12 inch LPs.

What can I do with 45 records?

How to Dispose of Old Vinyl Records

  1. Sell old vinyl records on eBay.
  2. Sell records at a garage sale or flea market.
  3. Place a classified ad in your local paper or in your local area of Craigslist.
  4. Call your local library and see if they accept donations of vinyl records.
READ ALSO:   Can a 13 year old have anorexia?

How long is a 45 rpm record?

If you exceed the maximum time suggested for a record side, it can affect the quality of the audio.

SIZE SPEED OPTIMUM TIME
12″ 33 rpm 17 minutes
10″ 45 rpm 7 minutes
10″ 33 rpm 11 minutes
7″ 45 rpm 3 minutes

What happens if you play a 33 at 45?

If you play the record at 45 instead of at 33, that puts the frequencies recorded on the record 45/33 times as high, which means that as far as the record is concerned the effect of the stylus is what it would be if the resonance were at 13KHz while you played it at 33.

How long is a 45 RPM record?

What are 45 RPM records worth?

Rock and roll and R&B 45s with the cardboard sleeves are worth at least $20, with many being worth more than $200. First pressings of albums have more value than second, third, or subsequent pressings. They are referred to as the “originals” that were purchased when the record first hit the charts.

How do I know what speed my vinyl is?

The RPM of a record will be printed somewhere on the record label, and all you need to do is switch your turntable from 33 1/3 to 45 mode.

What speeds do vinyl records play at?

Most commonly, vinyl records play at one of the following three speeds: 33, 45, and 78 rotations per minute (RPM). However, 78 RPM records are more rare than the standard 45 and 33 nowadays.

READ ALSO:   Is being a male nurse OK?

What does 33 – 45 – 78 rpm mean on vinyl?

Vinyl Record Sizes with Their Speeds – What Does 33 – 45- 78 RPM Mean? If you are listening to music on your record player, the chances are that you are looking for a full-size 12-inch vinyl or might know about other record sizes with their speeds. It must be spinning at 33-1/3 RPM. Else, it should be a 7-inch single and spinning at 45 RPM.

What does 4545 rpm mean on a record?

45rpm is a standard speed for Vinyl Single records, 16rpm is a slow speed for vinyl records but more about that later. RPM is revolutions per minute, the record rotates 45 times on the turntable every minute while the needle stays static, only moving slightly up and down.

Can you play a 33 rpm record at 45 rpm?

While playing a 33 RPM on a 45 RPM speed (and vice versa) won’t necessarily damage the record, it will definitely alter the sound quality that is produced when the record is being played. The good news is that fixing a slow record player is a relatively easy process.