Can I mix different ohm speakers?

While you can connect a mix of speakers with different ohm ratings, the best sound quality will come from equally rated speakers connected in pairs, such as two 8-ohm speakers connected to Speaker A on the amp or receiver and two 4-ohm speakers hooked up to Speaker B.

Why is mixing speakers with different impedances a bad idea?

This is because it will draw more power than the unit is designed to deliver. At that point, the amplifier will shut itself down before it causes too much damage. Therefore, you should try to match the impedance of your speakers to the impedance the amplifier is designed to drive – then you shouldn’t have any problems.

Can you use 6 ohm speakers with an 8 ohms receiver?

If your speakers are rated at 6- or 8-ohms, and most are, don’t worry about matching impedance with your receiver or amp.

How many speakers can you connect to a receiver?

A receiver with nine sets of speaker outputs, for example, might only be able to power seven speakers at a time. Let’s say you have a nine-channel receiver with 11 speaker outputs. You can hook up a full nine-channel surround sound system, plus stereo speakers in another room.

Can you mix 2 and 4 ohm speakers?

It will hurt the amp if its stable @ 2ohms. Simple rule in electronics is this. Anytime you put something in parrallel.

Will a 4 ohm speaker work with a 6 ohm receiver?

When in doubt about a 4 ohm speaker’s compatibility with a receiver, check with the speaker’s and/or receiver’s manufacturer. If your speakers are rated at 6- or 8-ohms, and most are, don’t worry about matching impedance with your receiver or amp.

How many ohms is too low for a speaker?

Most speakers are rated at 4, 6 or 8 ohms, and cheaper receivers can sometime have issues driving low-impedance (namely 4 ohm) speakers. ELAC speaker designer Andrew Jones. But that rating is just a baseline. Look at the impedance graph ELAC speaker designer Andrew Jones provided for this article.

Can I connect speakers with different impedances to an AV receiver?

The amplifier does not expect to “see” speakers of given impedance and you can connect speakers with different impedances (8 ohms, 6 ohms, 4 ohms) to an AV receiver with no negative effects so long as the impedance of any of your speakers doesn’t go below 4 ohms.

What is the impedance of a speaker?

We want the electric audio signals to drive the speakers to produce great sound. Loudspeakers have impedances of 8 ohms, 6 ohms or 4 ohms (those are “nominal” or approximate values, because the impedance of a speaker changes all the time with the different frequencies of music).