Can you use vegetable oil instead of chain oil?

Effective – Vegetable oils have natural properties including good lubricity, resistance to shear, a high flash point, and a high viscosity index. These qualities lend themselves to chain lubricant requirements similar to petroleum-based chain oils, and do not contribute to chain or bar wear over time.

Can you use canola oil for bar chain?

Vegetable and plant-based oils like canola oil can be used in place of bar and chain oil, but they will not work well in extremely cold or hot temperatures.

Can you use any oil to lubricate a chainsaw chain?

Motor Oil. Chain saw bar and chain oil isn’t rated by SAE like traditional automobile motor oil. If your manufacturer’s bar and chain oil is unavailable, you can use SAE 30 weight motor oil to lube your chain during the summer and SAE 10 weight during the winter, according to the University of Missouri Extension.

Can you use transmission fluid for chainsaw bar?

It might not be as tacky as dedicated bar oils, though. I use ATF to lubricate the bar on my firewood processer. It works real well.

What weight is bar oil for a chainsaw?

Similar to motor oil, chainsaw bar oil is available in various weights. The lightest oil is a 10W formula, while thicker oil may be up to 50W. A 30W chainsaw bar oil is generally considered standard for warm weather usage.

What viscosity is chainsaw oil?

What viscosity is chainsaw bar oil? The viscosity of chainsaw bar oil can vary depending on the formula but 30W is standard. In cold weather, a thin 10W chainsaw oil may be advantageous, while very hot temperatures may require a much thicker 40W or 50W formula.

What weight oil can I use for chainsaw bar?

To prevent this, chainsaw manufacturers make bar oils matched to the air temperature and the saw in which it is operated. Although they don’t disclose the weight of their oil, the University of Missouri Extension recommends in lieu of using a bar oil, select SAE 30 weight oil in summer and SAE 10 in winter.

Is gear oil the same as bar oil?

Can I Use Gear Oil As Bar Oil? Unless you are using your chainsaw in hot conditions, gear oil is not a recommended alternative bar oil.

Can I use motor oil instead of bar oil?

While motor oil is not the best substitute for chainsaw bar oil, it will work as a temporary measure if find you have no other option. The downside of motor oil is that it’s not sticky enough to stay on the bar and chain. So, when you’re using the chainsaw, the motor oil will fling off as you cut and make quite a mess.

What is the best oil for a chainsaw bar?

One of the best chainsaw bar oil I can personally recommend you to is the Oregon 54-026 Chain Saw Bar and Chain Oil Quart. This oil provides the chainsaw with maximum lubrication helping minimize resistance and friction as the chainsaw spins.

What grade of oil is used on a chainsaw oiler?

To prevent this, chainsaw manufacturers make bar oils matched to the air temperature and the saw in which it is operated. Although they don’t disclose the weight of their oil, the University of Missouri Extension recommends in lieu of using a bar oil, select SAE 30 weight oil in summer and SAE 10 in winter.

What can I use for chainsaw bar oil?

Electric chainsaws mostly require you to use bar and chain oil, which is used to oil the two most important parts of the electric chainsaw. It is necessary to keep these parts lubricated in the proper way so as to enable them to cope with the immense amount of motion and work they are subject to.

Can I use regular motor oil as my chainsaw bar oil?

Yes, my family always use motor oil on our chainsaws and have never had any issues. We usually service our own cars and store the used engine oil so that it can be used to lubricate our chainsaw or lawnmower whenever they need it. It is a good way to recycle old motor oil.