Do skateboard risers matter?
Table of Contents
Do skateboard risers matter?
Deciding whether or not to install risers Shortboarders may also use them to prevent wheel bite after landing a skate trick, thus prolonging the life of their board. Skateboard decks that use wheels smaller than 55mm do not typically require risers; however, even 1/8″ risers can help keep your hardware in place.
Do risers affect Ollies?
It’s jumping higher that will actually help you get your ollies higher. Letting the tail go down further is most likely to increase the angle of the board for when you slide your foot forward to ollie. So, yes, riser pads can make your ollies higher.
Do I need risers for 55mm wheels?
Risers are usually recommended for larger wheels 55mm and above, and while not necessary for smaller skate wheels, 1/8″ shock pads can always be used to help reduce vibration and stress cracks to your board.
What size wheels should I get for a 8.0 deck?
FIND THE RIGHT SIZE SKATE PARTS
| Deck Size | truck Size | Wheel Size |
|---|---|---|
| 8.0 | 7.75 – 8.25 Axles | 50 – 54 mm |
| 8.125 | 8.0 – 8.25 AXLES | 50 – 54 mm |
| 8.25 | 8.0 – 8.5 axles | 52 – 55 mm |
| 8.375 | 8.25 – 8.5 axles | 52 – 55 mm |
Is it easier to Ollie on smaller wheels?
Small wheels make it easier to land tricks, even when they feel a bit sketchy. Bigger wheels will cause you to fall when you land a trick a bit sketchy but smaller wheels still allow you to land a trick without running the risk of hurting yourself.
What size board do most pros skate?
All Around Professional Skateboarders: 8.25” – 8.5”
What makes a skateboard smooth?
Larger wheels allow you to have a smoother, more comfortable ride. They are also better for riding through different terrain. Smaller wheels are better for tight turns and tricks. Wide skateboard wheels will give you a smoother ride but aren’t conducive for performance riding.
Why are my Skateboard risers cracking?
The trucks of your skateboard vibrate and cause friction against your deck. Risers are supposed to dampen the vibrations and prevent cracks. If they don’t work properly they can cause tears and cracks to the wood. In the long run, this will break your board, so you should inspect your risers.
What are skateboard riser pads and how do they work?
Skateboard riser pads are hard plastic slips that are seated between the skateboard trucks and the deck to raise the deck height. Increase the life of your deck. Wheel bite can damage the rider or the wheel very easily since one wheel stops while the others continue moving. The results can be nasty. 1 What are Skateboard Riser Pads?
What is the difference between riser pads and shock pads?
Although they look similar and positioned in identical places on your skateboard there are vital difference between the two. Skateboard riser pads are made of hard plastic and their primary aim is to reduce wheel bite. Shock Pads are made of rubber and designed to reduce shock and vibration for a smoother ride.
Do I need riser pads for my Wheels?
If you are wheels are 55mm or smaller, you may not need riser pads. However, a ⅛” riser pad can help keep your gear and from vibrating loose (think of it as a washer that you use when used when screwing nuts and bolts. Riser Pads vs Hardware Size Calculator