How do you install an aftermarket license plate light?

How to Install a License Plate Light:

1. Step 1: Buy New License Plate Lights.
2. Step 2: Use a flat screwdriver to remove the license plate housing cover.
3. Step 3: Remove the bulb housing gently and unscrew the stock bulb.
4. Step 4: Screw your new LED light securely where the old one used to be and place it back in the housing.

Why are my tag lights not working?

This could either be a problem with a relay switch, a loose connection or the license plate light has burnt out and needs to be replaced. When you notice that the light is not working, contact a mechanic so they can replace the license plate light as soon as possible.

What is the license plate light called?

The license plate lamps are designed to illuminate the plate and registration tags on your vehicle and make it easily visible to law enforcement. In many states, a burnt out license plate bulb can get you a ticket. It is…

Do license plate lights have a fuse?

Is there a fuse for them? The license plate lamps are powered by the 10amp left parking light circuit fuse located in the under hood fuse panel. If any of your parking lamps on the left side are out this could be the problem. If those lights are working then the fuse should be good.

How do I remove a license plate bulb?

License plate bulb Since a burned-out license plate light bulb can get you a ticket, replace it if needed. Unscrew the lens or release the locking tab. Twist the bulb socket a quarter turn and pull it out. Snap in a new bulb and reinstall.

How do you wire a license plate light to a tail light?

Connect the wire from the license plate light to the wire from the taillight circuit. The ends of the wires must be spliced in order for them to be connected. Secure the wires together and test the light to make sure that it works correctly. Carry extra light bulbs so that the light can be repaired in a timely manner.

How do you remove a license plate light bulb?

Remove the cover over the license plate bulb. Every car differs, but most have a tab that you push in, and it slides right out. Remove the bulb from the socket. Sometimes it is a tight fit so you may need to use a screwdriver to pry the bulb loose.

Why does my license plate light stay on but not turn off?

There are several causes for the light being out–a blown bulb, faulty wiring or a bad socket. You will learn how to repair each one of these possible causes to your light problem. Remove the cover over the license plate bulb. Every car differs, but most have a tab that you push in, and it slides right out.

How do I choose the best license plate light fixtures?

Purchase a license plate light fixture as well as a light bulb. The PM Lights website states that a variety of license plate lights are available, so one should be chosen that will adequately light the plate and match the car’s design or color.