How important is the engine room logbook?

The recorded values and information are used as a reference, to compare and record data to assess the ongoing performance of different engine room machinery. The log book entries are very important during machinery breakdown and accidents are also taken as reference or evidence by the insurance company, surveyor etc.

Why is engine room important?

On a ship, the engine room (ER) is the compartment where the machinery for marine propulsion is located. To increase a vessel’s safety and chances of surviving damage, the machinery necessary for the ship’s operation may be segregated into various spaces.

Why is it important to record running hours of the engine parts component?

5. Keep a Track of Running Hours. Depending on the running hours of the machinery, the ship’s engineer will plan and perform the next maintenance procedure. Keeping a track of the running hours is extremely important to prevent any kind of sudden failure or breakdown of machinery.

Why is it important to perform a proper engineering watch?

Safety related items e.g. fire alarms and fire extinguishing system to be checked for proper functioning. Additionally check for any bad smell, abnormal sound, and look for any abnormality, leakage, level etc. In fact a good watch keeping helps keep aware of any changes and decision can be made out accordingly.

What is the importance of data logging and logbook on board?

He must always bear in mind that he is the Master’s representative and has primary responsibility at all times for the safe navigation of the ship and for fully complying with the latest COLREGS …..

What is the importance on keeping a daily logbook on boiler and what are the needed entry in the said logbook?

The CEA strongly recommend that every boilerhouse has a daily log of all activities in the boilerhouse and kept up to date on a daily / shift basis. This assists all staff in understanding what has and has not been done that day and what is still required to be done to ensure all checks and tests are carried out.

What are the importance of safety working practices in engine room operations?

One the most important tenets for safety in the engine room is fire prevention. Whether a vessel is docked or en-route, onboard fires pose one of the gravest threats to crew safety and should be prioritized when creating your vessel’s SMS.

How important is the contribution of pumps to the other machinery in the engine room?

Almost every major machinery and operations on board ships are supported by pumps. In fact none of the main machinery such as main engine or boiler can run without the help of pumps. From supplying fuel to the engine to discharging cargo to the ports, every single procedure is backed by a certain type of pump.

How important is keeping a proper record keeping on board ship?

Having a Logbook on ship and industries ensure safe operation with proper preventive maintenance. Furthermore it acts as a legal document for the certain steps and procedures; to be followed before reaching a particular sea water or to follow local rules.

What are the important points that a watchkeeping engineer must remember in filling up the engine room logbook?

7 Important Points To Consider While Filling Out Engine Room Log…

• Allot Sufficient Time for Taking Parameters.
• Always Take Data During Steady State Conditions.
• Note Down and Highlight Important Events, Accidents, Breakdowns and Near Misses.
• Note Down Correct Tank Levels and Transfer Details.

What is the information needed by an engineer before taking over a watch?

All important or unusual information regarding any of the ship’s machinery such as boiler, auxiliary engine, main engine etc. must be informed. In case any parameter reaches critical situation, the respective issue and the machinery should be informed to the relieving officer while handing over the watch.

What is the objective of engine room resource management?

Engine Room Resource Management (ERM) is a system of achieving safe engineering operations by proactively managing personnel, equipment, and information. Review the team roles, human factors, and situational awareness required to implement a proper ERM program, and learn how good ERM practices save vessels.

Why is it important to take care of your machinery?

Maintenance – keeping your machinery in good condition and good working order is vital. Malfunctioning or poorly maintained machinery can pose a serious health and safety risk, so ensure your machines are in good working order by conducting daily inspections, and ensuring they receive regular servicing and auditing.

What are the most important elements of a machinery inspection?

Safeguards and safety equipment – many machines will have safety mechanisms installed including emergency stops and guards. It’s important to ensure these are installed correctly and are in good working order, so it’s important to include these elements in your regular inspections of machinery and servicing routines.

What should they do to ensure the safety of the machine?

They should therefore do the following: Check that the machine is complete, with all safeguards fitted, and free from defects.

Should you wear gloves next to engineering machinery?

In general, the use of gloves next to engineering machinery such as lathes, drills, and other rotating-style equipment is considered dangerous due to the increased risk of entanglement.