How many blocks does it take to build a 3 bedroom house?

To build a three-bedroom house you would need about 2650-3250 blocks if you are building a single-story house with a square footage of 2250 sqft. If you plan on building a double-story house then the no. of blocks required would be about 6500.

How many blocks can build a 4 bedroom house in Nigeria?

if the size of the brick is 15x20x30 per m3 of block is 95 nos. so nwe can complete 1900blocks for 4 bed room.

How many blocks can 1 bag of cement lay?

A very small amount of cement can be added to mortar to increase it’s strength or to speed up the curing process. That being said, one bag of mortar, weighing 70 lbs. Mixed with sand in the proper 3 to 1 ratio will lay 40 twelve inch blocks or 50 eight inch blocks.

How many blocks can 1 bag of cement lay in Nigeria?

Yes , one way of looking to this is like 125 kg bag of cement would make almost 80– 90 kg of sand. So it will allow you to build roughly 38 blocks.

How many blocks can build 3 bed foundation?

Ultimately, the total number of blocks required to complete the construction = 903 + 1452 + 677 = 3032 blocks (disregarding wastage).

How much does it cost to build a 3 bedroom flat in Nigeria 2021?

On average, based on the estimate above, you should expect to spend a total of anything between N10. 5 million and N20 million for a typical 3-bedroom bungalow, although this could be even slightly cheaper in rural areas.

What is the cost of roofing a 3 bedroom bungalow in Nigeria?

The building materials for roofing includes roof truss, roofing sheets and ceiling (PVC ceiling or Asbestos ceiling). Total cost of roofing for a 3-bedoom bungalow is estimated between ₦700,000 and ₦1 million.

How many blocks does it take to build a house?

If 10 blocks is required for 1m 2 of wall, therefore (10 × 90.2304) = 903 blocks is required for 90.2304m 2 of wall. The number of blocks required to raise the building from foundation to DPC = 903 blocks (disregarding wastage and damages).

How many bricks do I need for a 200 sq ft house?

If you define average sized house as about 1,200 square feet, the perimeter of the house might be approximately 146 linear feet (25′ x 48′). Multiply that by a height of 8 feet to get a total square wall footage of 1,168. At 7 bricks per sf, you’ll need about 8,176 bricks. Click to see full answer

How many bags of mortar do I need to build a block?

Divide the number of blocks being installed by 33.3 to calculate how many bags are needed. Standard mortar requires a 1:3 cement to sand mix, which amounts to 1 yd 3 of sand for every seven bags of cement. You can also purchase pre-mixed bags of mortar, which generally yield around 12 blocks per 80-pound bag.

What is the size of a cinder block wall?

A cinder block measures 16X8X6 inches of width, height and thickness. If one were to build a 50X60 foot 3000 square feet house using cinder block for external 8 foot walls with a 4-foot footing we can estimate as follows.