What are the structural components of an RCC ribbed slab?

Ribbed slabs are made up of wide band beams running between columns with narrow ribs spanning the orthogonal direction. Normally the ribs and the beams are the same depth. A thin topping slab completes the system. Waffle slabs tend to be deeper than the equivalent ribbed slab.

What are the components of the frame structure?

Major Parts of Concrete Frame Construction

• Columns in Framed Structure. Ad.
• Beams in Framed Structure. Beams are the horizontal load-bearing members of the framed structure.
• Slab in Framed Structure. Ad.
• Foundation in Framed Structure.
• Shear Walls in Framed Structure.
• Elevator Shaft in Framed Structure.

What is RCC building?

RCC Building Means A building constructed from reinforcement concrete is called RCC building. RCC full form is reinforced cement concrete. Concrete and Steel reinforcement is combined together to form materials that are strong in compression as well in tension.

What are components of concrete?

Concrete is made up of two components, aggregates and paste. Aggregates are generally classified into two groups, fine and coarse, and occupy about 60 to 80 percent of the volume of concrete. The paste is composed of cement, water, and entrained air and ordinarily constitutes 20 to 40 percent of the total volume.

What is framed RCC structure and explain its various components?

It usually consists of a frame or a skeleton of concrete. Horizontal members are beams and vertical ones are the columns. Concrete Buildings structures also contain slabs which are used as base, as well as roof / ceiling. Among these, the column is the most important as it carries the primary load of the building.

What are the three main components of a building frame system?

A house frame for a single-story home will be made up of a sill, joists and studs. There are three basic elements that are joined together to form the skeleton on which the rest of the home will eventually rest: The sill plate is the first portion of framing that sits right on top of the concrete.

What are the materials used in RCC?

Reinforced cement concrete or RCC in construction consists of the following 6 ingredients:

• Cement.
• Fine aggregates.
• Coarse aggregates.
• Admixtures.
• Water.
• Reinforcement.

What are the 5 major components of concrete?

Concrete is a mixture of cement, air, water, sand, and gravel–it’s as simple as that! Not exactly. The typical concrete mix is made up of roughly 10\% cement, 20\% air and water, 30\% sand, and 40\% gravel. This is called the 10-20-30-40 Rule–though proportions may vary depending on the type of cement and other factors.

What are the five major components of concrete?

Concrete is made up of three basic components: water, aggregate (rock, sand, or gravel) and Portland cement. Cement, usually in powder form, acts as a binding agent when mixed with water and aggregates.

What are the different components of concrete?

What is RCC framed structure?

In RCC framed structure, the load is transferred from a slab to the beam then to the columns, further to the lower columns, and finally to the foundation which transfers the load to the soil, the walls are constructed after the frame is prepared, most tall buildings use RCC technology.

What are the components of a RCC structure?

Structural Elements of Reinforced Concrete Buildings Slab: Slabs are horizontal slab elements in building floors and roof. Beams: Long horizontal or inclined members with limited width and height are called beams. Column: Columns are vertical members that support loads from the beam or slabs. Frames: Footings: Footings are pads or strips that support columns and spread their load directly to the soil.

What is the fullform of RCC building?

Concrete is a versatile material which is widely used for the construction of structures. RCC full form is Reinforced cement concrete. RCC meaning in civil engineering is a composite material which consists of steel and concrete (which is a mixture of cement sand and aggregate) and known as reinforced cement concrete.

What is RCC stand for?

RCC stands for Reinforced Cement Concrete. The other is PCC, Difference is that in RCC, you have metal reinforcements (the metal bars) that helps the structure take the stresses like tension and compression.

What are the stages of RCC construction?

Column Layout Work: This is the first step of column construction. In this step,the location of columns is decided practically in the field.

Column Reinforcement Work: When marking of column location is done,the reinforcement of columns are placed according to the structural drawing.

Column Formwork: The floor height is normally kept at 10 feet.