What do they do on a first service motorcycle?

Continue system-by-system through the bike, checking the hardware on the steering and brakes. Also check the axles and pinch bolts, driveline, footpeg and handlebar mounts, and so on. At the initial service, it’s likely you’ll need to adjust cable freeplay.

Is the first service free on a new bike?

Normally when you buy a new bike the LBS offers a first free service, usually to be done about a month after purchase. This is mainly to check brake and gear cables as they stretch a bit when used over the first month.

When should you get your first oil change on a motorcycle?

How Often Does Motorcycle Oil Need to Be Changed?

1. Mineral oil should be replaced every 2,000 to 3,000 miles, or at least once a year.
2. Synthetic oil should be replaced every 7,000 to 10,000 miles, or at least once a year.
3. Semi-synthetic oil should be replaced every 5,000 to 6,000 miles, or at least once a year.

Should you let your motorcycle warm up?

It is crucial that you let your motorcycle warm up before riding it as it will have a profound effect on the performance and safety. There are a lot of seals and rings inside the engine that require oil circulating at optimal temperature. Warming up a motorcycle allows that oil to circulate efficiently.

How do you break in a new Harley Davidson motorcycle?

Break-In Riding Procedure

1. During the first 50 miles of riding, keep the engine speed below 3,000 RPM (5,000 RPM for VRSC™) in any gear.
2. Up to 500 miles, vary the engine speed and avoid operating at any speed for long periods.
3. Drive slowly and avoid fast starts at wide-open throttle until the engine has warmed up.

What is the engine break-in period for a motorcycle?

When people go out and buy a brand new motorcycle the first thing they are told about is the “Engine Break-In Period”. This is from the first time the motorcycle is turned on to about 1,500 miles.

Is it easier to remove and repair a motorcycle or car engine?

It is much easier and cheaper to remove and repair a motorcycle engine than a car engine. Many Riders do it themselves. A motorcycle with a damaged engine is rarely thrown out. Riders will take an engine apart, put new parts in and put it back together, or have someone else do it.

Why does my motorcycle Rev when stopped at stop lights?

When stopped at a stop light the engine idles, which is a constant engine speed. Since a motorcycle in the break-in period should avoid a constant engine speed, the Rider revs the engine. What it boils down to is that if you do not “break-in” your engine you will get bad mileage or even ruin it. 2. A repaired engine might also require it.

Do you need to break-in a new motorcycle?

After all, it’s not just your engine that needs to break-in. You need to scrub in those new tires, bed in those new brakes, and overall get familiar with how your new bike is balanced, how it turns and handles, shifts and stops.

https://www.youtube.com/watch?v=JwpdQwuqgLk