What does oilfield wireline do?

Usually consisting of braided cables, wirelines are used to perform wireline logging, as well. Used to place and recover wellbore equipment, such as plugs, gauges and valves, slicklines are single-strand non-electric cables lowered into oil and gas wells from the surface.

What does a wire line operator do?

A wireline operator installs cabling that enables a company to lower equipment into a gas or oil well. As a wireline operator, your job duties include designing the project, analyzing data on potential field sites, drilling the holes, and installing the mechanical equipment or cabling rig necessary to fulfill the plan.

What does wireline do on a Frac?

Wireline does the plugging and perforating that precedes the actual fracturing. The fracturing is done by pressure pumping crews using vast amounts of water, sand, and chemicals at extraordinary pressures. Every wellbore is lined with steel pipe. This pipe is known as casing.

What is meant by wireline?

Definition of ‘wireline’ A wireline is the cables used in wells to lower and raise equipment. Logging is carried out using special tools or equipment which are lowered into the borehole on a wireline. A wireline is the cables used in wells to lower and raise equipment.

What is a wire line truck?

The Wireline Truck is a completely self contained wireline vehicle with the operator interface cabinet in the forward section. Wireline high tensile steel system in the rear is operated hydraulically through the chassis.

What is E line oil and gas?

Wireline / E-Line Technology. In the oil and gas industry, the term wireline usually refers to a cabling technology used by operators of oil and gas wells to lower equipment or measurement devices into the well for the purposes of well intervention, reservoir evaluation, and pipe recovery.

What is wire line logging?

Wireline logging is the process of using electric instruments to continuously measure the properties of a formation, in order to make decisions about drilling and production operations.

What is coil tubing in oil and gas?

In the oil and gas industries, coiled tubing refers to a very long metal pipe, normally 1 to 3.25 in (25 to 83 mm) in diameter which is supplied spooled on a large reel. It is used for interventions in oil and gas wells and sometimes as production tubing in depleted gas wells.

What is coil tubing used for?

Coiled tubing applications include drilling operations, hydraulic fracturing, well completions, removing sand or fill from wellbore, and other applications that involve pumping fluids at high temperatures and high salinity.

What is mud logging in oil and gas?

Mud logging is the creation of a detailed record (well log) of a borehole by examining the cuttings of rock brought to the surface by the circulating drilling medium (most commonly drilling mud). In hydrocarbon exploration, hydrocarbon surface gas detectors record the level of natural gas brought up in the mud.

What is tubing string?

a device made up of pipes that is lowered into a borehole for the extraction of liquid and gaseous minerals. Tubing strings consisting of separate tubing joints screwed together are used for the exploitation of petroleum and gas deposits.

What is a wireline in oil and gas?

In the oil and gas industry, the term wireline usually refers to a cabling technology used by operators of oil and gas wells to lower equipment or measurement devices into the well for the purposes of well intervention, reservoir evaluation, and pipe recovery.

What is the difference between a slickline and a wireline?

While a slickline is a thin cable introduced into a well to deliver and retrieve tools downhole, a wireline is an electrical cable used to lower tools into and transmit data about the conditions of the wellbore. Usually consisting of braided cables, wirelines are used to perform wireline logging, as well.

What is E-line technology?

Wireline / E-Line Technology In the oil and gas industry, the term wireline usually refers to a cabling technology used by operators of oil and gas wells to lower equipment or measurement devices into the well for the purposes of well intervention, reservoir evaluation, and pipe recovery.

What are wireline logs used for?

Wireline logs can measure resistivity, conductivity and formation pressure, as well as sonic properties and wellbore dimensions. The logging tool, also called a sonde, is located at the bottom of the wireline. The measurements are taken by lowering the wireline to the prescribed depth and then raising it out of the well.

https://www.youtube.com/watch?v=SqXn-SuSn1o