What is point 2 point microwave link?
Table of Contents
What is point 2 point microwave link?
Point to point Ethernet bridge link facilitates a wireless data connection between two or more networks or buildings across distances up to 100 Kilometres and at speeds up to 1Gbps.
How far can a microwave link go?
How far can microwave internet go? Microwave links are capable of delivering an ultrafast connection over several 10’s of kilometres. The furthest connection we have installed to date spans 70 kilometres, delivering a high speed connection with 99.99\% uptimes.
Why microwave is used for long distance transmission?
Microwaves are small wavelength radio waves which have frequencies in range of gigahertz (GHz). Due to their high frequency, they have the ability to transmit signals over a long distance without any loss of data. They can carry vast range of frequencies without causing signal overlap or interference.
What is microwave communication range?
Microwave frequencies range between 109 Hz (1 GHz) to 1000 GHz with respective wavelengths of 30 to 0.03 cm. Within this spectral domain are a number of communication systems applications that are important in both the military and civilian sectors.
What is the maximum distance for point to point wireless?
Distance. PtP distances can reach anywhere up to 300KM, depending on terrain, environment, which frequency a PTP radio operates in, how large the antennas are, and what vendor is being used.
How does microwave communication work?
Microwave is a line-of-sight wireless communication technology that uses high frequency beams of radio waves to provide high speed wireless connections that can send and receive voice, video, and data information.
What are the limits of microwaves?
Microwave Oven Safety Standard A Federal standard (21 CFR 1030.10) limits the amount of microwaves that can leak from an oven throughout its lifetime to 5 milliwatts (mW) of microwave radiation per square centimeter at approximately 2 inches from the oven surface. This limit is far below the level known to harm people.
What is a wireless point to point?
Point to Point wireless is a data connection between two points (known as “end points”). The connection is delivered wirelessly through either radio waves or optical laser, and so does not require the use of poles or cables.
How far can 802.11 ac reach?
Maximum range comparison
| 5 GHz | Theoretical Distance | Real-World Distance |
|---|---|---|
| 802.11a | 390 ft | 195 ft |
| 802.11ac | 820 ft | 410 ft |
| 802.11n | 460 ft | 230 ft |
How do you set up a microwave link?
Microwave Link Installation, Alignment and Testing
- Rooftop, tower or monopole locations through use of riggers (crane, bucket extra)
- Installation of dish antenna on existing antenna mast.
- Installation of ODUs and IDUs as per link design.
- Running, labeling and securing of required cables (Cat5e, IF, fiber, power)
What are the limitations of a microwave network?
The line of sight can be limited by natural or man-made obstacles and also by the earth’s curvature which limits the practical distance of microwave links to 50-60kms (which would call for 100m tower heights and large dish antennas to achieve).
What are the design parameters for a point to point microwave link?
The required capacity (bandwidth throughput) of a point to point microwave link is a key design parameter. As the capacity increases, you would need to design the link for a higher SNR, resulting the need for stronger equipment and antennas. For point to point microwave links, the antenna on the two sides should be in line of sight of each other.
What is the range of microwave links?
Microwave links range from 2.4GHz to 42GHz spectrum. The higher the frequency, the higher the available capacity but at the same time, the effective range is lowered and the link would be more susceptible to rain or high humidity. To use a frequency, a license should usually be obtained from the legal authorities of the country.
How does microwave communication impact your wireless network?
Authored by CommScope experts, this book explains how the fundamentals of microwave communications impact the capacity and reliability of your wireless network. A modern wireless network depends on multiple systems, meshing together, to provide the customer with a positive experience—one that’s transparent, fast and most of all, dependable.
https://www.youtube.com/watch?v=lqpNe3NdE6I