What is slot hole?

Slot or Slotted Holes: an elongated hole. It is stretched in one direction but still has full radii on the ends.

What is groove in mechanical engineering?

In manufacturing or mechanical engineering a groove is a long and narrow indentation built into a material, generally for the purpose of allowing another material or part to move within the groove and be guided by it. This groove is for the flange on a train wheel.

What is Slot mechanical?

Slot: -a slot is an elongated hole. -it is stretched in one direction and usually has full radii on both ends.

What is difference between groove and slot?

A slot is long and usually has straight edges a hole is round. A groove is similar to a slot however ; a grove usually is pointed at the intersection of the sides.

Where are slotted holes used?

Oversized or slotted holes are used when you want to eliminate bearing or do not want the connection to transfer the load in one direction. Means slotted holes are used in bolted connection to allow the tolerance during the erection. It allows the end plate of more connected members to enable slip in joint.

What is the difference between slot and hole?

What do you mean by groove?

1 : a long narrow channel or depression. 2a : a fixed routine : rut. b : a situation suited to one’s abilities or interests : niche. 3 : top form a great talker when he is in the groove. 4 : the middle of the strike zone in baseball where a pitch is most easily hit a fastball right in the groove.

What is Slot example?

A slot is a narrow opening in a machine or container, for example a hole that you put coins in to make a machine work. He dropped a coin into the slot and dialed. Synonyms: opening, hole, groove, vent More Synonyms of slot. 2.

What is the difference between notch and groove?

As nouns the difference between groove and notch is that groove is a long, narrow channel or depression; eg, such a slot cut into a hard material to provide a location for an engineering component, a tyre groove, or a geological channel or depression while notch is a v-shaped cut.

Why are slotted holes used?

What is slotting milling?

Shaping (sometimes called slotting) is a machining process whereby a work piece is held on the machine table, which is then advanced into the path of a reciprocating ram, upon which is mounted a single-point cutting tool. Slotting can also be used to cut external shapes and forms as well.

What is the difference between a slot and a groove?

You can simply understand that a slot can be through or blind but a groove is always blind. In manufacturing or mechanical engineering a groove is a long and narrow indentation built into a material, generally for the purpose of allowing another material or part to move within the groove and be guided by it.

What are slot or slotted holes?

2.Slot or Slotted Holes: an elongated hole. It is stretched in one direction but still has full radii on the ends. A slot is cut into a flat plate or normal to the axis of a cylinder. Slot Hole Design Consideration : Slotted holes are widely used in most sorts of mechanical design.

How to choose the slotted hole of a cylinder?

Choose the most appropriate technique for sizing the slotted hole. The technique used for sizing the slot determines how the slot is located. 3. Groove: a groove is a cylindrical slot. Grooves are cut around the OD or ID of a cylinder and do not pass through the axis of the cylinder.

What is an elongated hole?

-a slot is an elongated hole. -it is stretched in one direction and usually has full radii on both ends. (the edges may or may not be round) -usually a slot is cut into a flat plate.