What is the disadvantage of integrated circuit 1 point?

Explanation: The disadvantage of IC is that, a lack of flexibility an IC. It is generally not possible to modify the parameters within which an integrated circuit will operate.

What is the advantage and disadvantage of IC?

The entire physical size of IC is extremely small than that of discrete circuit. The weight of an IC is very less as compared entire discrete circuits. It’s more reliable. Because of their smaller size it has lower power consumption.

What is 1st IC?

Robert Noyce invented the first monolithic integrated circuit chip at Fairchild Semiconductor in 1959. It was made from silicon, and was fabricated using Jean Hoerni’s planar process and Mohamed Atalla’s surface passivation process.

What are the advantages of IC over discrete circuits?

ICs have two main advantages over discrete circuits: cost and performance. Cost is low because the chips, with all their components, are printed as a unit by photolithography rather than being constructed one transistor at a time. Furthermore, packaged ICs use much less material than discrete circuits.

Who Cannot be fabricated on IC?

___________ cannot be fabricated on an IC

• A. Transistors.
• Diodes.
• Resistors.
• Large inductors and transformers.

What is uses of IC?

Today, integrated circuits are frequently used in electronics design and can be categorized as analog, digital, or a combination of the two. ICs can be used for a variety of purposes including amplifiers, video processors, computer memory, switches, and microprocessors.

What is the IC more commonly called?

integrated circuit (IC), also called microelectronic circuit, microchip, or chip, an assembly of electronic components, fabricated as a single unit, in which miniaturized active devices (e.g., transistors and diodes) and passive devices (e.g., capacitors and resistors) and their interconnections are built up on a thin …

Who invented VLSI?

Carver Mead is an inventor, chip designer, entrepreneur, and university physicist. Mead helped to develop the standards and tools that permitted tens of thousands of transistors to be packaged on a single silicon chip, what is known as very large-scale integration (VLSI).

How do you know your IC is bad?

Touch the IC with your finger just by starting the voltage supply to it. Notice if the IC is getting heat up as it naturally gets or if you are not able to touch it after few 10-12 seconds. If the ic is getting heat up extremely faster then the IC is surely to be damaged.

What are the disadvantages of integrated circuit (IC)?

There are some disadvantages of integrated circuit (IC) which are given below, The integrated circuit (IC) can be handle only limited amount of power. The high grade P-N-P assembly is not possible. It is difficult to be achieved low temperature coefficient. The coils or indicators cannot be fabricated.

What are the limitations of ICS?

Limited power rating as it is not possible to manufacture high power (say greater than 10 W) ICs. Need of connecting inductors and transformers exterior to the semiconductor chip as it is not possible to fabricate inductor and transformers on the semiconductor chip surface.

What is the problem in using IC engines?

The problem in using IC engine is that they need fuel for combustion and when these fuels are burnt there is liberation of large amount of pollutants which is very harmful to the environment.

How can we reduce the power consumption of IC?

The reduction in power consumption is achieved due to extremely small size of IC. Coils or indicators cannot be fabricated. It can be handle only limited amount of power. High grade P-N-P assembly is not possible. It is difficult to be achieved low temperature coefficient.