What is the meaning of the word halyard?
Table of Contents
What is the meaning of the word halyard?
Definition of halyard : a rope or tackle for hoisting and lowering something (such as sails)
How do halyards work?
In its simplest form a halyard is just a length of line that runs from the deck, up the mast head and back down to a point where it attaches to the head of the sail for hoisting. An eye splice can replace the knot when attaching a shackle or other hardware to your halyard.
How do you get a halyard down?
Step 1: Take a loose length of line that is long enough to reach the lost halyard from the deck and tie a noose in it with a slip knot, so that you can pull the noose shut. Step 2: Clip the noose line with noose open into the shackle at the end of your spare halyard, as shown in the detail drawing above.
What is halyard stretch?
When a halyard stretches, it allows the sail fabric to move aft. The draft of the sail moves with it. This results in the driving force rotating aft, creating more heeling moment and more weather helm.
What is flag halyard?
Flagpole halyard is rope, lanyard, wire-center halyard or stainless steel cable. These are the various ways to rig a flagpole. The halyard is what allows the flag to travel up and down the flagpole. An External Halyard Flagpole System places the rope on the outside of the flagpole.
Is Kimberly Clark halyard?
Halyard currently is a wholly-owned subsidiary of Kimberly-Clark that was formed to hold Kimberly-Clark’s health care business. Following the distribution, Halyard will no longer be a wholly-owned subsidiary of Kimberly-Clark.
What is Flag halyard?
How do you Reeve a new halyard?
It is easy to reeve a new halyard. Simply attach the cockpit end of the old halyard to the new halyard, then pull the old halyard through the clutch, blocks and mast. As long as the two ends remain attached to each other, it only takes a few minutes to reeve the new halyard.
What line is halyard on?
Use a blended braid Vectran® or Spectra® line for the halyards, jib sheets, and guys. Avoid using polyester for these high-load applications so that you don’t have to get extra-large diameters. Polyester can be used in control lines and other lower load lines.
How thick should my halyard be?
If you have a boat that is significantly heavier than average, make sure to chose a thicker diameter mooring line as well….Mooring lines: rope diameter advice.
| Yacht length | Type of material docklines | |
|---|---|---|
| Polyester | Polypropylene | |
| 8 m / 26ft | 10 mm | 14 mm |
| 10 m / 33ft | 12 mm | 16 mm |
| 12 m / 39ft | 14 mm | 18 mm |
What flies on the masthead of a naval ship?
commissioning pennant
A commissioning pennant, or masthead, which a warship flies from its masthead and indicates the commission of the captain of the ship (and thus of the ship itself). In the Royal Navy, the commissioning pennant is a small St George’s Cross with a long tapering plain white fly.
What is a halyard on a sailboat?
In sailing, a halyard or halliard is a line ( rope) that is used to hoist a ladder, sail, flag or yard. The term halyard comes from the phrase, ‘to haul yards’. Halyards, like most other parts of the running rigging, were classically made of natural fibre like manila or hemp .
What does it mean to jump the halyard?
“Jumping the halyard” is a technique used to raise a large sail quickly by employing a few crew members to work simultaneously on the halyard. The person jumping stands next to the mast and manually grabs the halyard as high as they can (sometimes this necessitates jumping) and pulling it down as fast and far as possible.
What is the purpose of a halyard swivel?
The halyard swivel is a crucial component that prevents the halyard from trying to wrap itself around the furler when furling and unfurling. I just wanted to take a minute and chime-in on the “halyard swivel phenomenon” that has (apparently) taken the sailing world by storm.
What does it mean to sweat a halyard?
To “sweat” the halyard is to take as much slack out of it as possible. This may be done with a winch, or manually. To manually sweat a halyard, the sweater grasps the line and, in a fluid motion, hauls it laterally towards himself, then down toward the deck, letting the tailer take up the new slack.