What oil can I use instead of 5w20?

As you have likely now concluded, 5W20 is better suited for colder temperatures. If you need motor oil for summertime performance, 5W30 is going to be the better bet. However, you should only switch to this oil type of your car manufacturer or personal mechanic recommend doing so.

What’s the difference between 10w30 and 5w20?

Main Differences Between 5w20 and 10w30 5w20 is thinner at lower temperatures, whereas 10w30 is thicker at lower temperatures. 5w20 is better for cold-weather starting, whereas 10w30 is better for sealing action. Light duty petrol and diesel engines use 5w20, whereas large weight carrying engines need 10w30.

Can you mix 10W 30 and 5w20 oil?

It should be fine, considering the temps, and that the suggested oil viscosity is usually 5W-30, so two quarts of 5W-20 and three of 10W-30 probably come pretty close to some viscosity around 5W-30.

Will it hurt my engine to use 5W30 instead of 5W20?

Using 5W-30 instead of 5W-20, you risk damaging your car’s engine because the internal engine components work with 5W-20 motor oil. 5W-20 and 5W-30 motor oil both have the same winter rating. It means that both motor oils have the same viscosity under cold temperature.

Can I use 10W 40 instead of 5W20?

In a 5W20 engine. You could use a 0W20 oil (I use 0W20 oil) in cold weather and it would be Ok by Ford. (they will not say it is good, but they will still honor the warranty..) But 10W40 is way off, and I bet they would be not so happy over any engine problems if they found 10W40 in a failed engine.

Can I use 10W 40 instead of 5w20?

Can you put 10W-40 in a 5W-30?

Your vehicle does not use 5W-30 oil. The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.

Can I use 0W 20 oil instead of 5w20?

The 0W or 5W refers to the pumpability in cold temperatures. Therefore, a 0W would flow more easily than a 5W and could be an acceptable substitute. Thus, it is suitable to use a SAE 0W-20 as a replacement for SAE 5W-20 application.

Is 5W20 better than 5W30?

Yes, a lower viscosity oil like 5w20 will provide less protection than 5w30 in normal operating conditions. However, a lower viscosity oil is better in areas of the country with lower average temperatures and below freezing conditions.

What does 10W30 grade motor oil mean?

In regard to multigrade oils, the first number in the code, such as 10W in SAE 10W-30, means that the oil can still be pumped by the engine at a temperature as low as a single grade 10W oil. A 5W, like in SAE 5W-30, can be pumped at an even lower temperature, and a 0W, like in SAE 0W-30, will pump at the lowest tested temperatures.

What is the difference between 5W-30 and 10W-30?

Difference in Meaning. Both of the 10w30 vs.

Performance. Both 5w30 and 10w30 engine oils have a similar SAE rating,meaning that they will perform the same at high or operating temperatures.

Ideal Use. Before you select and engine oil,it is important to check the location of where you will be using the car.

Lubrication.

What is the difference between 5W – 20 and 5W – 30 motor oil?

The main difference between 5W-30 and 5W-20 motor oil is that the latter is less viscous (or thick). When used in a vehicle’s engine, 5W-20 oil creates less friction due to its thinner viscosity , meaning it causes less drag across engine parts like the crankshaft, valvetrain , and pistons.