What should be done if you need to use an extension cord in a building?

Plug your extension cord into the outlet of the room you are working in and avoid laying cord across the room to minimize trip hazards. Don’t forget to use GFCI outlet or GFCI circuit breaker-protected branch or just have a portable or built-in GFCI available.

What should a worker check for before using an extension cord?

Portable cord and plug connected equipment and flexible cord sets (extension cords) shall be visually inspected before use on any shift for external defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence of possible internal damage (such as pinched or crushed …

What is the best way to protect an extension cable while working?

Only use extension cords with GFCI protection. GFCI stands for Ground Fault Circuit Interrupter and it will disconnect power if a potentially dangerous situation occurs. A GFCI compares current flowing through the cord and disconnects the power of there is a “leak” or imbalance of 4-6mA.

Which of the following rules need to be followed when working on portable electric equipment?

working with or near electricity or power lines. from power lines and live electrical wires. are located in case of an emergency. clearly.

WHEN CAN extension cords be used?

Extension cords provide power for devices with cables that can’t reach any nearby electrical outlets. Choosing the right type of extension cord is important to ensure electrical safety and prevent home fires.

How do you inspect an extension cord?

1. Inspect the cord & plug. Look for cracks or damaged insulation, loose or missing plug blades, and indications of overheating or burning, especially on the plug.
2. Make sure the plug is securely attached to cable.
3. Check for hot or discolored outlet wall plates.

How do you keep extension cords safe?

Extension Cord Safety Tips

1. Don’t overload and overuse extension cords.
2. Choose the right extension cord.
3. Don’t connect multiple extension cords.
4. Don’t force a plug into the wrong kind of outlet.
5. Avoid tripping or fire hazards.
6. Never use a damaged extension cord.
7. Check the cord’s wattage rating.

What are the do’s and don’ts in using extension cord?

Using extension cords

• Never remove an extension cord’s grounding pin to fit into a two-prong outlet.
• Avoid powering multiple appliances with one cord.
• Never use indoor extension cords outdoors.
• Don’t plug multiple cords together.
• Don’t run extension cords under rugs or furniture.

What precaution should be taken while using electricity?

1- Always use insulated tools while working.

• 2-Never use equipment with frayed cords, damaged insulation or broken plugs.
• 3-Know the wire code of your country.
• 4-Never use an aluminium or steel ladder if you are working on any receptacle at height in your home.
• 5-Avoid water at all times when working with electricity.

Which of these precautions must be followed while working with electricity?

Avoid water at all times when working with electricity. Never touch or try repairing any electrical equipment or circuits with wet hands. It increases the conductivity of the electric current. Electrical hazards include exposed energized parts and unguarded electrical equipment which may become energized unexpectedly.

Is it safe to connect 2 extension cords?

Attaching multiple extension cords is a fire hazard. Although it sometimes seems to be the only solution, attaching two extension cords together is not a good idea. Keep a home safe, and buy a longer extension cord made for your particular purpose.